Welcome
Thank You for you interest in a strongarm manipulator for your company. This from requires some time to fill out completely.
Please gather any detail about your application that might be needed, such as product weights, dimensions, and drawings of the install location.
The following information is vital to our understanding of your requirements.
Please supply as completely as possible.
Product Drawings
Machine Drawings
Layout Drawings
Photos of area and products to be handled
Video of area and current process
Product Information
The product to be manipulated is called:
Product Diminsions
The basic shape of the product is:
Rolls or Tubes
Boxes or Blocks
Plates or Sheets
Bags or Sacks
Other Shapes
Please Describe the shape of the product:
Is this product presently being handled?
No
Yes
What is the current method of movement and handling?
Step by Step sequence of operation for manipulator will be:
Will more then one type of product be handled?
No
Yes
No
Yes
No
Yes
No
Yes
Normally, we expect to handle
parts/hour for
hours/day.
Basic Machine Type
Machine Mounting Preference:
Overhead Stationary
Floor-Mounted Pedestal
Manual Overhead Trolley
Powered Overhead Trolley
Fork Lift Portable Base
Pallet Jack Mounted
Type of attachment preferred:
Unknown
Mandril
Vacuum
Magnetic
Clamp
Hook
Other
If other, please explain:
Do you need to upend the product?
No
Yes
Ambient Conditions
What is the temperature of the product when handled by manipulator?
°F.
Atmosphere:
Normal
Dusty
Abrasive
Corrosive
Explosive
Other
Please enter the classification:
Class 1, Division 1
Class 1, Division 2
Class 1, Zone 0
Class 1, Zone 1
Class 1, Zone 2
Class 2, Division 1
Class 2, Division 2
Class 3, Division 1
Class 3, Division 2
Please explain:
Services
Air Pressure available at manipulator location:
P.S.I.
Electrical available:
Volts
Phase
Hertz
Layout Information
Maximum reach needed:
inches from center line of machine
(Keep in mind the manipulator would have a 360-degree rotation)
Distance to bottom of product at lowest position:
Inches
Distance to bottom of product at highest position:
Inches
Please indicate where measurement was taken from:
(Floor, Platform, Etc.)
Clearance Factors
Distance to lowest fixed overhead obstruction which can't or would not be moved:
Inches from floor.
Obstructions:
Workspace Restrictions
Opening/Door/Framework and other obstacles: (Describe)
Additional Comments
Please list ant other comments or concerns you may have.
Contact Information:
Product Information
The product to be manipulated is called
.
Product Diminsions
The basic shape of the product is
.
Max.
Min.
Outside Diameter:
Inches
Inside Diameter:
Inches
Length:
Inches
Weight:
Lbs.
Max.
Min.
Height:
Inches
Length:
Inches
Width:
Inches
Weight:
Lbs.
Max.
Min.
Length:
Inches
Width:
Inches
Thickness:
Inches
Weight:
Lbs.
Max.
Min.
Length:
Inches
Width:
Inches
Weight:
Lbs.
Please Describe the shape of the product:
Is this product presently being handled?
What is the current method of movement and handling?
Step by Step sequence of operation for manipulator will be:
Will more then one type of product be handled?
Will there be a continuous run of one product?
Normally, we expect to handle
parts/hour for
hours/day.
Basic Machine Type
Machine Mounting Preference:
Type of attachment preferred:
Do you need to upend the product?
Ambient Conditions
Minimum
Normal
Maximum
Ambient temperature:
°F.
What is the temperature of the product when handled by manipulator:
°F.
Atmosphere:
Services
Air Pressure available at manipulator location:
P.S.I.
Electrical available:
Volts
Phase
Hertz
Layout Information
Maximum reach needed:
inches from center line of machine
Distance to bottom of product at lowest position:
Inches
Distance to bottom of product at highest position:
Inches
Please indicate where measurement was taken from:
Clearance Factors
Distance to lowest fixed overhead obstruction which can't or would not be moved:
Inches from floor.
Obstructions
Workspace Restrictions
Additional Comments
General Information
Proposal needed by date:
